Export bundle into the provided directory (or into directory named as a resulting chart in the
current working directory). werf bundle contains built images defined in the werf.yaml, helm chart, service values which contain built images tags, any custom values and set values params provided
during publish invocation, werf addon templates (like werf_image).

Syntax

werf bundle export [options]

Options

      --add-annotation=[]
            Add annotation to deploying resources (can specify multiple).
            Format: annoName=annoValue.
            Also, can be specified with $WERF_ADD_ANNOTATION_* (e.g.                                
            $WERF_ADD_ANNOTATION_1=annoName1=annoValue1,                                            
            $WERF_ADD_ANNOTATION_2=annoName2=annoValue2)
      --add-label=[]
            Add label to deploying resources (can specify multiple).
            Format: labelName=labelValue.
            Also, can be specified with $WERF_ADD_LABEL_* (e.g.                                     
            $WERF_ADD_LABEL_1=labelName1=labelValue1, $WERF_ADD_LABEL_2=labelName2=labelValue2)
      --allowed-docker-storage-volume-usage=70
            Set allowed percentage of docker storage volume usage which will cause cleanup of least 
            recently used local docker images (default 70% or                                       
            $WERF_ALLOWED_DOCKER_STORAGE_VOLUME_USAGE)
      --allowed-docker-storage-volume-usage-margin=5
            During cleanup of least recently used local docker images werf would delete images      
            until volume usage becomes below "allowed-docker-storage-volume-usage -                 
            allowed-docker-storage-volume-usage-margin" level (default 5% or                        
            $WERF_ALLOWED_DOCKER_STORAGE_VOLUME_USAGE_MARGIN)
      --allowed-local-cache-volume-usage=70
            Set allowed percentage of local cache (~/.werf/local_cache by default) volume usage     
            which will cause cleanup of least recently used data from the local cache (default 70%  
            or $WERF_ALLOWED_LOCAL_CACHE_VOLUME_USAGE)
      --allowed-local-cache-volume-usage-margin=5
            During cleanup of least recently used local docker images werf would delete images      
            until volume usage becomes below "allowed-docker-storage-volume-usage -                 
            allowed-docker-storage-volume-usage-margin" level (default 5% or                        
            $WERF_ALLOWED_LOCAL_CACHE_VOLUME_USAGE_MARGIN)
      --config=''
            Use custom configuration file (default $WERF_CONFIG or werf.yaml in working directory)
      --config-templates-dir=''
            Custom configuration templates directory (default $WERF_CONFIG_TEMPLATES_DIR or .werf   
            in working directory)
  -d, --destination=''
            Export bundle into the provided directory ($WERF_DESTINATION or chart-name by default)
      --dev=false
            Enable development mode (default $WERF_DEV).
            The mode allows working with project files without doing redundant commits during       
            debugging and development
      --dev-mode='simple'
            Set development mode (default $WERF_DEV_MODE or simple).
            Two development modes are supported:
            - simple: for working with the worktree state of the git repository
            - strict: for working with the index state of the git repository
      --dir=''
            Use specified project directory where project’s werf.yaml and other configuration files 
            should reside (default $WERF_DIR or current working directory)
      --disable-auto-host-cleanup=false
            Disable auto host cleanup procedure in main werf commands like werf-build,              
            werf-converge and other (default disabled or WERF_DISABLE_AUTO_HOST_CLEANUP)
      --docker-config=''
            Specify docker config directory path. Default $WERF_DOCKER_CONFIG or $DOCKER_CONFIG or  
            ~/.docker (in the order of priority)
            Command needs granted permissions to read, pull and push images into the specified repo 
            and to pull base images
      --docker-server-storage-path=''
            Use specified path to the local docker server storage to check docker storage volume    
            usage while performing garbage collection of local docker images (detect local docker   
            server storage path by default or use $WERF_DOCKER_SERVER_STORAGE_PATH)
      --env=''
            Use specified environment (default $WERF_ENV)
      --git-work-tree=''
            Use specified git work tree dir (default $WERF_WORK_TREE or lookup for directory that   
            contains .git in the current or parent directories)
      --home-dir=''
            Use specified dir to store werf cache files and dirs (default $WERF_HOME or ~/.werf)
      --insecure-registry=false
            Use plain HTTP requests when accessing a registry (default $WERF_INSECURE_REGISTRY)
      --introspect-before-error=false
            Introspect failed stage in the clean state, before running all assembly instructions of 
            the stage
      --introspect-error=false
            Introspect failed stage in the state, right after running failed assembly instruction
      --introspect-stage=[]
            Introspect a specific stage. The option can be used multiple times to introspect        
            several stages.
            
            There are the following formats to use:
            * specify IMAGE_NAME/STAGE_NAME to introspect stage STAGE_NAME of either image or       
            artifact IMAGE_NAME
            * specify STAGE_NAME or */STAGE_NAME for the introspection of all existing stages with  
            name STAGE_NAME
            
            IMAGE_NAME is the name of an image or artifact described in werf.yaml, the nameless     
            image specified with ~.
            STAGE_NAME should be one of the following: from, beforeInstall, importsBeforeInstall,   
            gitArchive, install, importsAfterInstall, beforeSetup, importsBeforeSetup, setup,       
            importsAfterSetup, gitCache, gitLatestPatch, dockerInstructions, dockerfile
      --log-color-mode='auto'
            Set log color mode.
            Supported on, off and auto (based on the stdout’s file descriptor referring to a        
            terminal) modes.
            Default $WERF_LOG_COLOR_MODE or auto mode.
      --log-debug=false
            Enable debug (default $WERF_LOG_DEBUG).
      --log-pretty=true
            Enable emojis, auto line wrapping and log process border (default $WERF_LOG_PRETTY or   
            true).
      --log-project-dir=false
            Print current project directory path (default $WERF_LOG_PROJECT_DIR)
      --log-quiet=false
            Disable explanatory output (default $WERF_LOG_QUIET).
      --log-terminal-width=-1
            Set log terminal width.
            Defaults to:
            * $WERF_LOG_TERMINAL_WIDTH
            * interactive terminal width or 140
      --log-verbose=false
            Enable verbose output (default $WERF_LOG_VERBOSE).
      --loose-giterminism=false
            Loose werf giterminism mode restrictions (NOTE: not all restrictions can be removed,    
            more info https://werf.io/documentation/advanced/giterminism.html, default              
            $WERF_LOOSE_GITERMINISM)
  -p, --parallel=true
            Run in parallel (default $WERF_PARALLEL)
      --parallel-tasks-limit=5
            Parallel tasks limit, set -1 to remove the limitation (default                          
            $WERF_PARALLEL_TASKS_LIMIT or 5)
      --repo=''
            Docker Repo to store stages (default $WERF_REPO)
      --repo-container-registry=''
            Choose repo container registry.
            The following container registries are supported: ecr, acr, default, dockerhub, gcr,    
            github, gitlab, harbor, quay.
            Default $WERF_REPO_CONTAINER_REGISTRY or auto mode (detect container registry by repo   
            address).
      --repo-docker-hub-password=''
            Docker Hub password (default $WERF_REPO_DOCKER_HUB_PASSWORD)
      --repo-docker-hub-token=''
            Docker Hub token (default $WERF_REPO_DOCKER_HUB_TOKEN)
      --repo-docker-hub-username=''
            Docker Hub username (default $WERF_REPO_DOCKER_HUB_USERNAME)
      --repo-github-token=''
            GitHub token (default $WERF_REPO_GITHUB_TOKEN)
      --repo-harbor-password=''
            Harbor password (default $WERF_REPO_HARBOR_PASSWORD)
      --repo-harbor-username=''
            Harbor username (default $WERF_REPO_HARBOR_USERNAME)
      --repo-quay-token=''
            quay.io token (default $WERF_REPO_QUAY_TOKEN)
      --report-format='json'
            Report format: json or envfile (json or $WERF_REPORT_FORMAT by default)
            json:
            	{
            	  "Images": {
            		"<WERF_IMAGE_NAME>": {
            			"WerfImageName": "<WERF_IMAGE_NAME>",
            			"DockerRepo": "<REPO>",
            			"DockerTag": "<TAG>"
            			"DockerImageName": "<REPO>:<TAG>",
            			"DockerImageID": "<SHA256>",
            		},
            		...
            	  }
            	}
            envfile:
            	WERF_<FORMATTED_WERF_IMAGE_NAME>_DOCKER_IMAGE_NAME=<REPO>:<TAG>
            	...
            <FORMATTED_WERF_IMAGE_NAME> is werf image name from werf.yaml modified according to the 
            following rules:
            - all characters are uppercase (app -> APP);
            - charset /- is replaced with _ (DEV/APP-FRONTEND -> DEV_APP_FRONTEND)
      --report-path=''
            Report save path ($WERF_REPORT_PATH by default)
      --secondary-repo=[]
            Specify one or multiple secondary read-only repos with images that will be used as a    
            cache.
            Also, can be specified with $WERF_SECONDARY_REPO_* (e.g. $WERF_SECONDARY_REPO_1=...,    
            $WERF_SECONDARY_REPO_2=...)
      --set=[]
            Set helm values on the command line (can specify multiple or separate values with       
            commas: key1=val1,key2=val2).
            Also, can be defined with $WERF_SET_* (e.g. $WERF_SET_1=key1=val1,                      
            $WERF_SET_2=key2=val2)
      --set-file=[]
            Set values from respective files specified via the command line (can specify multiple   
            or separate values with commas: key1=path1,key2=path2).
            Also, can be defined with $WERF_SET_FILE_* (e.g. $WERF_SET_FILE_1=key1=path1,           
            $WERF_SET_FILE_2=key2=val2)
      --set-string=[]
            Set STRING helm values on the command line (can specify multiple or separate values     
            with commas: key1=val1,key2=val2).
            Also, can be defined with $WERF_SET_STRING_* (e.g. $WERF_SET_STRING_1=key1=val1,        
            $WERF_SET_STRING_2=key2=val2)
  -Z, --skip-build=false
            Disable building of docker images, cached images in the repo should exist in the repo   
            if werf.yaml contains at least one image description (default $WERF_SKIP_BUILD)
      --skip-tls-verify-registry=false
            Skip TLS certificate validation when accessing a registry (default                      
            $WERF_SKIP_TLS_VERIFY_REGISTRY)
      --ssh-key=[]
            Use only specific ssh key(s).
            Can be specified with $WERF_SSH_KEY_* (e.g. $WERF_SSH_KEY_REPO=~/.ssh/repo_rsa,         
            $WERF_SSH_KEY_NODEJS=~/.ssh/nodejs_rsa).
            Defaults to $WERF_SSH_KEY_*, system ssh-agent or ~/.ssh/{id_rsa|id_dsa}, see            
            https://werf.io/documentation/reference/toolbox/ssh.html
  -S, --synchronization=''
            Address of synchronizer for multiple werf processes to work with a single repo.
            
            Default:
             - $WERF_SYNCHRONIZATION, or
             - :local if --repo is not specified, or
             - https://synchronization.werf.io if --repo has been specified.
            
            The same address should be specified for all werf processes that work with a single     
            repo. :local address allows execution of werf processes from a single host only
      --tmp-dir=''
            Use specified dir to store tmp files and dirs (default $WERF_TMP_DIR or system tmp dir)
      --values=[]
            Specify helm values in a YAML file or a URL (can specify multiple).
            Also, can be defined with $WERF_VALUES_* (e.g. $WERF_VALUES_ENV=.helm/values_test.yaml, 
            $WERF_VALUES_DB=.helm/values_db.yaml)
      --virtual-merge=false
            Enable virtual/ephemeral merge commit mode when building current application state      
            ($WERF_VIRTUAL_MERGE by default)
      --virtual-merge-from-commit=''
            Commit hash for virtual/ephemeral merge commit with new changes introduced in the pull  
            request ($WERF_VIRTUAL_MERGE_FROM_COMMIT by default)
      --virtual-merge-into-commit=''
            Commit hash for virtual/ephemeral merge commit which is base for changes introduced in  
            the pull request ($WERF_VIRTUAL_MERGE_INTO_COMMIT by default)